Front in anodized aluminium

Outside dimensions : 105 x 40 x 5 mm.

Dimensions internal circuit 80 x 26 x 16 mm.

Signalling red / green with high efficiency LED diameter 19 mm.

Possibility of selecting fixed or flashing light by means of jumper

Controls for selecting LED with contacts N.O.

Rim mounting

Front in anodized aluminium

Outside dimensions : 140 x 40 x 5 mm.

Dimensions internal circuit 100 x 26 x 16 mm.

Electrical and functional characteristics of indicator light section the same as article 55010

Open or call pushbutton with contact N.O..

Rim mounting

Front in anodized aluminium

Outside dimensions : 186 x 40 x 5 mm.

Dimensions internal circuit 162 x 26 x 16 mm

Electrical and functional characteristics of the indicator light section are the same as article 55010

Intercom:Power supply : 12 Vdc

Call pushbutton with green LED signalling connection with receiver

Amplified system equipped with speaker and microphone compatible with standard 5-wire intercom

Separate volume adjustments for speaker and microphone by trimmers

Rim mounting

Front in anodized aluminium

Outside dimensions : 105 x 40 x 5 mm.

Dimensions internal circuit 80 x 33 x 16 mm.

Power supply : 12 Vdc

Call pushbutton with green LED signalling connection with receiver

Amplified system equipped with speaker and microphone compatible with standard 5-wire intercom

Separate volume adjustments for speaker and microphone by trimmers

Rim mounting

Front in anodized aluminium

Outside dimensions : 186 x 40 x 5 mm.

Dimensions internal circuit 162 x 26 x 16 mm.

Electrical and functional characteristics of the indicator light section are the same as article 55010

Open pushbutton with contact N.O.

Intercom:Power supply : 12 Vdc

Call pushbutton with green LED signalling connection with receiver

Amplified system equipped with speaker and microphone compatible with standard 5-wire intercom

Separate volume adjustments for speaker and microphone by trimmers

On demand we print any writing on front plate

Rim mounting

Front in anodized aluminium

Outside dimensions : 105 x 40 x 5 mm.

Dimensions internal circuit : 32 x 32 x 23 mm.

Micro-camera White and Black Power supply : 9 - 14.5 Vdc

Input power : 1.2 W

Working temperature : - 10 / + 55 °C

Horizontal definition: 380 Lines TV1/3" CCD

Scan system : 625 Lines 50 Hz.

Synchronism : internal

Output signal: Standard composite video 1 Vpp - 75 Ohm

Sensitivity : 0.2 LuxLens : Fixed Focus Lens f = 3.6 mm 92°

Auto Iris : CCD Iris with electronic shutter1/100.000 sec.

Gamma : 0.45

Rim mounting

Front in anodized aluminium

Outside dimensions : 135 x 40 x 5 mm.

Dimensions internal circuit 80 x 33 x 16 mm.

Electrical and functional characteristics of the intercom section are the same as article 55012

Electrical and functional characteristics of the video section are the same as article 55015

Rim mounting

Front in anodized aluminium

Outside dimensions: mm. 105 x 40 x 5

Internal deep : mm. 49

Push button with contact C./N.O./N.C.

Operating voltage : 5A / 250 Vac - 0,2 A a 125 Vdc

Rim mounting

Front in anodized aluminium

Outside dimensions: mm. 105 x 40 x 5

Internal deep : mm. 49

Push button with contact C./N.O./N.C.

Operating voltage : 5A / 250 Vac - 0,2 A a 125 Vdc

This push button can be used to release magnetic doors retainers for closing fire proof doors.

Rim mounting