Narrow style intelligent solenoid bolt locks

Related products :

• Solenoid bolt for interlocking system
  
  
• Solenoid lock Corni look alike
  
  
• Solenoid bolt for aluminium mid-rail
  
  
• Electric deadbolt for hinged or sliding gates
  
  
• Electric deadbolt for garage doors
  
  
• Indicator Lamp
  

Solenoid bolt lock

Plug in connector

Anti-thrust anti-saw 16mm diam. steel bolt, 20mm throw

Stainless steel forend

Euro-profile key override. Available with backsets 25, 30, 35mm

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.with bolt sensor

See drawing at bottom of page

Revolving bolt in anticutting hardened steel with mechanical block on closed position -

Bolt dimensions : extension 20 mm. ( 25 mm. in version XL ), diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Plug-in connector

N.O. contact for Opening Bolt position free voltage contact C. / N.O. / N.C.

Door position contact N.O. for the Open/Closed monitoring function or for use of outside door alignment sensor

Opto-electronic bolt position control

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Timings can be turned off for use of solenoid bolt with outside management electronics

Optional anti-rebound ball-catch and receiver

Optional Swiss round cylinder hole.

• Contacts
• Faq
• Buy online

Documents:

• Wiring diagram and general instruction for solenoid bolt 256 and 258 (Pdf 155Kb)
  
  
• Troubleshooting
  
  
  

Power supply and batteries

Casing to apply solenoid bolt on the doors

Desktop consoles

Code 25800 - Fail secure

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.with magnet

See drawing at bottom of page

Revolving bolt in anticutting hardened steel with mechanical block on closed position

Bolt dimensions : extension 20 mm. (25 mm. in version XL), diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector

N.O. contact for Opening Bolt position free voltage contact C. / N.O. / N.C.

Door position contact N.O. for the Open/Closed monitoring function or for use of outside door alignment sensor

Opto-electronic bolt position control

Internal magnetic sensor for door position

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Timings can be turned off for use of solenoid bolt with outside management electronics

Optional anti-rebound ball-catch and receiver.

Optional Swiss round cylinder hole.

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.

See drawing at bottom of page

Reversible latch in anticutting hardened steel

Latch dimensions : diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector N.O. contact for

Opening Latch position free voltage contact C. / N.O. / N.C.

Opto-electronic latch position control

Push buttons for monitoring and adjustment of the latch reclosing times from 0 to 60 sec.

Timings can be turned off for use of solenoid bolt with outside management electronics

Optional anti-rebound ball-catch and receiver.

Optional Swiss round cylinder hole.

How to select left or right hand of the latch ( pdf 234 Kb)

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.

Reversible latch in anticutting hardened steel

Latch dimensions : diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector N.O. contact for

Opening Latch position free voltage contact C. / N.O. / N.C.

Opto-electronic latch position control

Technical Data are subject to change without notice.
Dimensions in Millimeters.

Dimension drawing (Pdf 41Kb)