Quadra series

Related products :

• Micro Solenoid bolt for doors and windows
  
  
• Solenoid bolt with mechanical override
  
  
• Micro Solenoid bolt for cabinet and boxes without signal

Solenoid bolt for doors and windows

Code. 21610
Solenoid bolt, fail safe with magnetic sensor for door position

Code. 21611
Solenoid bolt, fail safe without magnetic sensor for door position

Code 21810
Solenoid bolt, fail secure with magnetic sensor for door position

Code 21811
Solenoid bolt, fail secure without magnetic sensor for door position

Front plate and striking in s/steel

Bolt dimensions : extension 18 mm. , diameter 12 mm.

Operating volt. 12/24 Vdc

Absorbed current : 600 mA

Current insertion: 100 %

Bolt position free voltage contact C. / N.O. / N.C.

Fits horizontally, optional vertical fitting available

When energised can become warm - not for use on timber or plastic doors

• Contacts
• Faq
• Buy online

Power supply and batteries

Brackets and covers to apply the solenoid bolt on the door - rim application

Electronics for interlocking system

Download drawing in Pdf ( 16,70 Kb )

Fits horizontally, optional vertical fitting available

Code 21813
Fail secure

Code 21613
Fail safe

Dimensions of lock body: mm 30 x 30 x 70

Bolt dimensions : extension 21 mm. , diameter 12 mm.

Operating volt. 12/24 Vdc

Absorbed current : 600 mA

Current insertion: 100 %

Bolt position free voltage contact C. / N.O. / N.C.

Fits horizontally, optional vertical fitting available

Download dimensional drawing in Pdf (30Kb)

When energised can become warm - not for use on timber or plastic doors

Code 21910 - With magnetic sensor for door position

Code 21911 - Without magnetic sensor for door position

Latch closed without power

Latch dimensions : extension 14 mm. , diameter 12 mm.

Operating volt. 12/24 Vdc

Absorbed current : 600 mA

Current insertion: 100 %

Latch position free voltage contact C. / N.O. / N.C.

Fits horizontally, optional vertical fitting available

Spring latch action - When the door closes, the latch retracts to allow the door to pass by the strike plate. When the hole in the strike plate lines up with the latch, the spring in the latch projects it into the hole.

Download drawing in Pdf ( 16,70 Kb )

Code 21913
Fail secure with spring latch

Latch closed without power

Dimensions of lock body: mm30 x 30 x 70

Bolt dimensions : extension 17 mm. , diameter 12 mm.

Operating volt. 12/24 Vdc

Absorbed current : 600 mA

Current insertion: 100 %

Bolt position free voltage contact C. / N.O. / N.C.

Fits horizontally, optional vertical fitting available

Download dimensional drawing in Pdf (30Kb)

When energised can become warm - not for use on timber or plastic doors