Narrow style solenoid bolt lock for interlocking doors

Related products :

• Solenoid bolt for single door
  
  
• Solenoid bolt for aluminium mid-rail
  
  
• Electric deadbolt for hinged or sliding gates
  
  
• Electric deadbolt for garage doors
  
  
• Indicator lamps
  

Interlocking system

Internal microprocessor electronic to control the movements of the locks such that their movements succeed each other in a predetermined sequence, assuring that opening cannot be simultaneously

Connection between Solenoid bolt and Console can be done with Plug-in Module

Euro-profile key override. Available with backsets 25, 30, 35mm

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.with bolt sensor

See drawing at bottom of page

Revolving bolt in anticutting hardened steel with mechanical block on closed position

Bolt dimensions : extension 20 mm. ( 25 mm. in version XL ), diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector

Arranged for interlock connection between 2 or more doors

N.O. contact for Opening Bolt position free voltage contact C. / N.O. / N.C.

Door position contact N.O. for the Open/Closed monitoring function or for use of outside door alignment sensor

Opto-electronic bolt position control

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Timings can be turned off for use of solenoid bolt with outside management electronics

Traffic Indicator Lights Relay outputs are available to control traffic lights.

For user convenience, a green light is typically used to signify a door is ready for access. A red light is usually lit to indicate that a door is un-accessible. Alarm relay outputs are also available for special requirements.

Optional anti-rebound ball-catch and receiver

Optional Swiss round cylinder hole.

• Contacts
• Faq
• Buy online

Documents:

• Wiring diagram and general instruction for solenoid bolt 246 and 248 (Pdf 271 Kb)
  
  
• Troubleshooting
  
  
  

Power supply and batteries

Casing to apply solenoid bolt on the doors

Desktop consoles

Code 24800 - Fail secure

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.with magnet

See drawing at bottom of page

Revolving bolt in anticutting hardened steel with mechanical block on closed position

Bolt dimensions : extension 20 mm. (25 mm. in version XL), diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector

Arranged for interlock connection between 2 or more doors

N.O. contact for Opening Bolt position free voltage contact C. / N.O. / N.C.

Door position contact N.O. for the Open/Closed monitoring function or for use of outside door alignment sensor

Opto-electronic bolt position control

Internal magnetic sensor for door position

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Timings can be turned off for use of solenoid bolt with outside management electronics

Traffic Indicator Lights Relay outputs are available to control traffic lights.

For user convenience, a green light is typically used to signify a door is ready for access. A red light is usually lit to indicate that a door is un-accessible. Alarm relay outputs are also available for special requirements.

Optional anti-rebound ball-catch and receiver.

Optional Swiss round cylinder hole.

Technical Data are subject to change without notice.
Dimensions in Millimeters.

Dimension drawing (Pdf 41Kb)