The electric handle serves to electrify an emergency fire door without the need for drilling additional holes, thus leaving the certification of the door unchanged.

Electro door handle - Ouverture series

External time delay circuit

What to order

Example of installation

Code 40800

• Fail secure
• No relocking time delay
• Connection diagram for electric handle 40800

Code 40801

• Fail secure
• With relocking time delay.
• Connection diagram for electric handle 40801

Code 40600

• Fail safe
• No relocking time delay
• Connection diagram for electric handle 40600

Code 40601

• Fail safe
• With relocking time delay
• Connection diagram for electric handle 40601

Body in metal with black paint finish
Handle in aluminium with black paint finish
Dimensions: 225 x 38 x 30 mm ( handle height 67 mm )
C/C distance between cylinder and handle: 72, 92 mm
Handle frame: 9 mm (8 mm on request)
Fixing plate designed to eliminate need for additional fixing holes
Power supply 12/24 Vac/dc 
Current absorption: 300 - 700 mA depending from voltage

Internal microswitch to indicate handle engaged.
2-colour red/green led to indicate access inhibited/enabled

Sound to indicate handle engagement ( Version 40801 and 40601 only ) - Enabling the buzzer

Application: mounted in place of the traditional mechanical handle on the external side of a safety exit, this electric handle enables activation of the handle, usually set to neutral, by means of a simple electric pulse, to allow access from the outside.
This signal can also be generated by access control systems if required.

The electric handle serves to electrify an emergency fire door without the need for drilling additional holes, thus leaving the certification of the door unchanged.

C/C distance between cylinder and handle: 72, 92 mm The electric handle is provided with 3 cylinder plates compatible with the lock c/c distance (72 or 92) . If half cylinders or no cylinder is used, insert the blind plate.

Documents :

Electro door handle Catalogue (Pdf 127 Kb)