Home

Contact

Buy Online

Back

Electric deadbolt for gates

Gate bolt series

Electric deadbolt for hinged or sliding gates

Weatherproof all-metal construction with stainless steel 304 cover

 

 

28800

 

Code. 28800 - electric deadbolt, stainless steel

Simple operation, using a relay driven from the gate control panel warning lamp output, the bolt is powered for the duration of the gate stroke and drops down again when power is removed ( spring action )

Euro-profile cylinder key override, one or both sides of the gates ( Cylinder not supplied )

Mounting instruction Dimensional drawing Euro-profile cylinder dimension


Secure anti-jemmy, 20 mm diameter steel bolt with 15 mm end taper to facilitate centring of the strike aperture, with 60 mm extension (50 mm throw) 

Only requires an hole in the ground. No need for snib plates or catches

Operating voltage : 24 Vdc - Current 750mA ( 5A peak ) 
Surface mounts with welding plate supplied

Internal self-heating - when temperature drops below 5°C, coil warms-up to avoid freezing

 

On demand: horizontal application

Ideal for securing commercial and private gates at high risk, large leaf gates and gates subject to wind loading

Video typical installation on double leaf gate

 


Electric deadbolt for gates

Gate bolt series - low cost version

Electric deadbolt for hinged or sliding gates

Weatherproof all-metal construction with black painted cover

 

 

28800LC

 

Code 28800LC - electric deadbolt, black painted

Code 28800LCW - electric deadbolt, black painted, with internal self heating

Simple operation, using a relay driven from the gate control panel warning lamp output, the bolt is powered for the duration of the gate stroke and drops down again when power is removed ( spring action )

Euro-profile cylinder key override, one or both sides of the gates ( Cylinder not supplied )

Mounting instruction Dimensional drawing Euro-profile cylinder dimension


Secure anti-jemmy, 20 mm diameter steel bolt with 15 mm end taper to facilitate centring of the strike aperture, with 60 mm extension (50 mm throw) 

Only requires an hole in the ground. No need for snib plates or catches

Operating voltage : 24 Vdc - Current 750mA ( 5A peak ) 
Surface mounts - welding plate not supplied

Video typical installation on double leaf gate

 

Top


FIXING PLATE FOR GATE LOCK

Flat plate in stanless steel for fixing the bolt 288 to the gate

Supplied standard with the 28800 - on request with the 28800LC

02288

 

Code 02288 - stainless steel fixing plate

Technical drawing

 


FLOOR STRIKE

Stainless steel striking plate for bolt insertion into the floor

 

02290

Code 02290 - stainless steel floor strike

Not included in the packing of 28800 and 28800LC

Dimensions