www.opera-italy.com

 

 

Fail safe
Solenoid bolt Art. 25600
Solenoid bolt with handle square 8mm Art. 25608
Solenoid bolt with handle square 9mm Art. 25609

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.with magnet adjustable in extension

Revolving bolt in anticutting hardened steel with mechanical block on closed position

Bolt dimensions : extension 20 mm. (25 mm. in version XL), diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector

N.O. contact for Opening Bolt position free voltage contact C. / N.O. / N.C.

Door position contact N.O. for the Open/Closed monitoring function or for use of outside door alignment sensor

Opto-electronic bolt position control

Internal magnetic sensor for door position

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Timings can be turned off for use of solenoid bolt with outside management electronics

 

Fail secure
Solenoid bolt Art. 25800
Solenoid bolt with handle square 8mm Art. 25808
Solenoid bolt with handle square 9mm Art. 25809

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.with magnet adjustable in extension

Revolving bolt in anticutting hardened steel with mechanical block on closed position

Bolt dimensions : extension 20 mm. (25 mm. in version XL), diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector

N.O. contact for Opening Bolt position free voltage contact C. / N.O. / N.C.

Door position contact N.O. for the Open/Closed monitoring function or for use of outside door alignment sensor

Opto-electronic bolt position control

Internal magnetic sensor for door position

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Timings can be turned off for use of solenoid bolt with outside management electronics

 
Solenoid bolt Art. 25900
Solenoid bolt with handle square 8mm Art. 25908
Solenoid bolt with handle square 9mm Art. 25909

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.

Reversible latch in anticutting hardened steel

Latch dimensions : diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector N.O. contact for

Opening Latch position free voltage contact C. / N.O. / N.C.

Opto-electronic latch position control

Push buttons for monitoring and adjustment of the latch reclosing times from 0 to 60 sec.

Timings can be turned off for use of solenoid bolt with outside management electronics

 
Solenoid bolt Art. 25910

 

Mechanical opening with European profile cylinder

Mortice applicaton

Front plate in s/steel 320 x 25 x 3 mm.

Counterplate in s/steel 150 x 25 x 3 mm.

Reversible latch in anticutting hardened steel

Latch dimensions : diameter 16 mm.

Operating voltage : 12/24 Vdc

Absorbed current : 2.5 A of peak / 130 mA for maintenance with electronic control

Internal microprocessor control electronics

Connection by quick connector N.O. contact for

Opening Latch position free voltage contact C. / N.O. / N.C.

Opto-electronic latch position control